
Bmw diagnostic Software package for professionals and hobbyists
Summary
This is a ready-to-go collection of software used to diagnose, code and perform service on your BMW car. Everything is contained within an easy to set up WMware Virtual Machine.
With this software package you can:
* View detailed information of the error codes reported by all the control units on your car and clear them from the memory.
* Read live sensor data from the car while driving or idle to pinpoint error locations and performance degradation, such as locating defective parking distance sensors or checking the state of diesel injectors.
* Register a new battery.
* Command the control units in the car:
** to clear trickier errors, such as lights not being working even after changing bulb (overcurrent protection) or Webasto permanently locked after the water pump failure
** forcing DPF regeneration.
** activate ABS pump for bleeding.
* Guided service plans for example to replace air suspensions.
* Coding (configuring) software functionality of the car, such as light behavior, remembering automatic start stop state, digital speedometer, disabling legal disclaimers, etc.
* Retrofitting of items that were not originally on the car.
Changelog
12/6/2020
ISTA+ and Data files updated to version 4.26.35.
Updated E-Sys launcher cheat codes from .
11/15/2020
Added a video showing how to bleed air suspension bellows on F11 when replacing them.
Added a video showing how to load Daten files for WinKFP.
11/12/2020
Updated SP-Daten files to v67.1. Programming files are left out to save space, but can be provided on request for WinKFP programming.
Cleaned INPA interfaces for E&F series + added N47 engine for E-series.
Updated BMW Coding Database software + database.
Added manuals and guides for the software in the VM.
Reduced the download size to 28 GB and extracted size to 85 GB.
11/10/2020
Added a video showing how to code digital speedometer on BMW E61.
10/23/2020
ISTA+ and Data files updated to latest version 4.25.40.
Added Dr.Gini and TestO software.
Reduced the download size to 33.4 GB and the extracted size to under 100 GB.
09/22/2020 Added ETK 01-2020 electronic parts catalog with prices included!
07/20/2020 ISTA+ and Data files updated to latest version 4.24.12.
Benefits of using a Virtual Machine
* The VM has no access to your host PC and can't harm it in any way. The software is often installed to the root of C: drive which you might not want to have in your own PC.
* Any software or hardware changes to your host PC will not break the VM. You will always have a working and clean car diagnostics toolkit when you need it, just the way you left it last time.
* You don't have to install any extra drivers on your PC for the different connection cables. For example the USB CAN cable might mess up with your COM port settings and the ENET cable requires you to use a specific IP address on your ethernet adapter settings in Windows.
* It is easy to move the VM between computers should you want to change a laptop for example, or would like to have the environment on several computers.
* You can keep backups of the VM if you want to make changes to it, so you can always revert back to a working setup.
Requirements
* Windows PC or Mac with:
** Preferably dual core processor 2015 newer year version
** 4 GB RAM
** 100 GB of free space. The virtual machine can be run from a fast USB hard drive also.
* Coding, Diagnostics and Service:
** K+DCAN USB cable for E-Series cars.
** ENET cable for F/I/G-Series. I sell a bundle with the cable and this VM in here:
* Programming:
** ICOM adapter for all series (needed only if you want to program control units with e.g. newer version of firmware).
What's included
* Download link to VMware virtual machine (~30GB of download) with all the software pre-installed and ready to use.
* Video instructions for setting up and basic usage. Following videos were filmed using this particular VM:
** Installing the VM
** Setting up the USB and ENET adapters.
** Reading and clearing error codes on E-series and F-series.
** Checking diesel fuel injector mass adjustment values from a running car on E-series.
** Coding an F11 BMW to remember the last automatic start/stop selection in ESYS.
** Coding an E61 BMW to show digital speedometer with NCS Expert + NCS Dummy.
** Using ISTA+ to bleed air suspension bellows when replacing them.
** Loading Daten files for WinKFP.
* Support in getting the connection to your car work through Etsy messages.
Software
Name Version Series Description
INPA
5.0.6
SP-DATEN v67.1
All
INPA can be used for:
* Reading and clearing error codes (DTCs) from all control units
* Activating functions such as headlight level adjustment to test their functionality
* Reading sensor values eg. from injectors or parking distance sensors.
ISTA+ 4.26.35 All
Diagnostics, service and programming tool for all BMW models. This is the tool mostly used by BMW official dealers. Programming only with ICOM connection and full psdzdata.
ETK 01-2020 All Electronic parts catalogue for all BMW models starting from 1950's to 2020.
Includes prices for the parts.
BMW Coding database All
Lists available codings for E- and F-series.
psdzdata 4.26.35 F/I/G
Data files for F/I/G-series cars.
Separate virtual machines with lite or full database. Lite version is much smaller, used for diagnostics and coding only. Full version is 180GB and is used to program the control units on the car with ICOM adapter.
E-Sys Launcer PRO
E-SYS
2.8.1.155
3.27.1
F/I/G E-Sys is used to do FDL (Function Data Line, individual parameter coding per control unit) coding and retrofitting for newer BMW models.
TokenBuster 1.0 F/I/G Used to generate token and authentication for E-Sys launcher PRO 2.8.1, should you need it. This virtual machine has the E-Sys launcher already authenticated.
FSC generator F/I/G Updating maps for Navigator. Maps need to be sourced separately.
Dr.Gini B22 All Software for quickly viewing information of control units on the car, gauges with data, starting jobs on the ECU.
TestO 2017-06-26 All
High speed graphing and recording live data from the ECU.
Finnish made software that can be downloaded for free from .
NCS Expert 4.0.1 E Tool for coding E-series cars.
NCS Dummy 4.0.1 E NCS Dummy makes working with NCS Expert a lot easier.
BMW Coding Tool 2.5.0 E Tool for easy updating the Daten files on the VM.
WinKFP 5.3.1 E Used to update software on E-series ECUs. The full SP-Daten files for programming are provided on request.
Compatibility
* 1-series: E81, E82, E87, E88, F20, F21, F44, F45, F46
* 2-series: F22, F23, F44, F45, F46
* 3-series: E46, E83, E90, E91, E92, E93, F30, F31, F34, F80, G20, G21
* 4-series: F32, F33, F35, F36, F82, F83, G22, G23, G24
* 5-series: E39, E60, E61, F07, F10, F11, F18, G30, G31
* 6-series: E63, E64, F06, F12, F13, G32
* 7-series: E38, E65, E66, F01, F02, F03, F04, G11, G12
* 8-series: G14, G15, G16
* X-series: E83, E70, E71, E84, F15, F16, F25, F26, F48, G01, G02, G05
* Z-series: E85, E86, E89, G29
* i3: I01
* i8: I12
Shipping
The link will be instantly
available once payment is confirmed. It will be seen in the downloads section of your obd2technology account.
Payments
WE ACCEPT THE DIFFERENT PAYMENT METHODS ADVERTISED ON THE SITE, SUCH AS PAYPAL, VISA AND MASTERCARD CARDS AND BITCOIN
How To Place An Order, download and common questions:
Faq Page – Obd2 Technology
https://obd2technology.com/product/bmw-diagnostic-coding-and-service-software-vm-bmw-esys-ista-inpa-etk-01-2020-rheingold-download/?feed_id=538&_unique_id=63712fb06be81
Comentarios
Publicar un comentario